Flying-Hobby
GRYPHON AUTO BOOSTER REMOTE OPERATED GLOW IGNITER
| - Operating Voltage | 4.8V to 7.4V, User Selectable |
| - Idle Current Drain | 20mA |
| - Working Current Drain | 650mA |
| - Size | 10mm x 40mm x 23mm (HxWxL) |
| - Weight | 20g With Cables |
Overview:, The Gryphon Auto Booster is a remote operated glow ignition device. Sleek design encased in a durable plastic shell, the Auto Booster tends to make a nice addition to any Nitro helicopter, airplane car, or even boat for easy glow plug ignition., Specs:, Features:, - Glow plug can be remotely ignited with a transmitter by using a receiver channel (Gear, AUX, etc),
- The glow ignition operation can increase engine power rapidly ...Flying-Hobby
GRYPHON EXTREME-HELI DC-DC VOLTAGE REGULATOR SILVER
| Product Details | Specifications |
| - Input voltage | 6 to 10 Volts (5 to 8 cell NiCd/MH or 2cell LiFe/Po) |
| - Output voltage | Servo channel 5.2V, 6.0V, 6.8V, 7.4V, 8.4V(Bypass) |
| - Output current | Servo channel 10A(MAX15A @6.0V) |
| - Low voltage alarm setup | LiFe type(6.5V) LiPo type(7.3V) Enable to setup |
| - Switch type | Fail safe(Fail-Safe-On) Pin-flag Contactless Type |
| - Power connector type | DINS Connector Type |
| - Size | 17mm(H) x 40mm(W) x 64mm(L) |
| - Weight | 45g (Excluding cables) |
| - Components | Main unit 1EA, RX cable 4EA, Switchboard & Cable 1EA, |
| Signal terminal | low voltage alarm output |
| + terminal | the same voltage output as servo channel |
| - terminal | common ground |
☞ The case that the servo specifications are the same : If operating voltage specifications of four channel servos are all the same, all four channels are connected., ☞ The case that the servo specifications are different : If it is used three CCPM(6.0V) and a throttle servo(4.8V) mixed with devices such as governor, the throttle servo should be used to directly connect with the receiver.,
RX channel 5.2V(Fixed) RX channel 5A(MAX10A) Operating guide Features ◆ ...Flying-Hobby
GRYPHON EXTERNAL BUZZER
,
Product Details GEB-1010 Gryphon External Buzzer This optional accessory for ...Flying-Hobby
SAVOX SC-1257TG DIGITAL SERVO
| Dimensions | 40.3 x 20 x 37.2mm |
| Weight | 52.4g |
| Speed (sec/60°) | 0.07 |
| Torque (kg-cm/oz-in) | 10.0/138.8 |
| Gear | Titanium & Aluminium |
| Case | Aluminium |
Flying-Hobby
SOLO PRO V1 2.4GHZ RTF PACKAGE (RED)
Features:, , Specifications:, , Package Includes:,
********can not ship to Turkey and Belgium( as the custom ...Flying-Hobby
SAVOX SH-1290MG DIGITAL SERVO
| Stellzeit bei 4,8 V | 0,059 sec/60 Grad |
| Immersion time at 4.8 V | 0.059 sec/60 degrees |
| Stellzeit bei 6,0 V | 0,048 sec/60 Grad |
| Immersion time at 6.0 V | 0.048 sec/60 degrees |
| Stellkraft bei 4,8 V | 40 Ncm |
| Force at 4.8 V | 40 Ncm |
| Stellkraft bei 6,0 V | 50 Ncm |
| Force at 6.0 V | 50 Ncm |
| Gewicht | ca. 56,0 g |
| Weight | approx 56.0 grams |
| Abmessungen | ca. 40,3 x 20,0 x 37,2 mm |
| Dimensions | approx 40.3 x 20.0 x 37.2 mm |
Technische Daten Savox SH-1290 MG:, Specifications Savox SH-1290 MG:, ,
Description Das Savox SH-1290 MG ist ein ultra schnelles Digitalservo ...Flying-Hobby
SAVOX SC-1256TG DIGITAL SERVO
| Dimensions | 40.3 x 20 x 37.2mm |
| Weight | 52.4g |
| Speed (sec/60°) | 0.15 |
| Torque (kg-cm/oz-in) | 20.0/277.6 |
| Gear | Titanium & Aluminium |
| Case | Aluminium |
Flying-Hobby
HOBBYWING-UBEC 5V/6V 3A(SWITCHING)
| 1.Output | 5V/3A and 6V/3A switchable |
| 2.Ripple | <50mVp-p(@2A/12V) |
| 3.Input | 5.5V-23V (2-5S lithium battery pack,5-15 cells NiMh/NiCd pack) |
| 4.Size | 41.6mm*16.6mm*7.0mm (length*width*height) |
| 5.Weight | 6g(input and output cables not included); 8g(cables included) |
Specification:,
Why do you need to use UBEC? The UBEC is ...Flying-Hobby
SCORPION BEARING SET FOR HK-4035 V2
,
Product Details In order to keep your motor in top ...Flying-Hobby
HOBBYWING UBEC-5A-HV (HIGH VOLTAGE)
| Continuous output current | 5 Amps |
| Burst output current | 7.5 Amps |
| Input | 8V-42V ( |
| Quiescent current | 20mA |
| Weight | 37g |
Output Voltage:, 5V or 6V (Changeable with an output-voltage select switch ), Size:, 48mm*27mm*9mm (length*width*height),
The 5A-HV-UBEC is a switch-mode DC-DC regulator supplied with a ...Flying-Hobby
T-REX 500 - 0.6M 15T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS
,
For pinions as tough as a Rhinoceros! Try our new ...Flying-Hobby
T-REX 500 - 0.6M 12T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS
,
Product Details For pinions as tough as a Rhinoceros! Try ...Flying-Hobby
T-REX 500- 0.6M 14T "RHINO GEAR" ULTRA HARDENED STEEL PINIONS
,
Product Details For pinions as tough as a Rhinoceros! Try ...Flying-Hobby
EDGE 423MM PREMIUM CF BLADES - FLYBARLESS VERSION
| Specs | - Length |
| - Width | 42mm |
| - Root | 10mm |
| - Bolt Hole | 3mm |
| - Weight | ~ 65 grams per blade |
Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,
EDGE high performance CF rotor blades are new premium blades ...Flying-Hobby
EDGE 693MM PREMIUM CF BLADES - FLYBARLESS VERSION
| Specs | - Length |
| - Width | 60mm |
| - Root | 12mm |
| - Bolt Hole | 5mm |
| - Weight | ~ 185 grams |
Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,
EDGE high performance CF rotor blades are new premium blades ...